Common defects in plasma spray coatings and how to prevent them
Release time:
2026-10-29
Author:
Zhenzhong Fused New Material
Article overview
This guide covers the six most critical defect categories in plasma spray coatings, their root causes, measurable impact data, and step-by-step prevention protocols — written for manufacturing engineers, surface coating specialists, and procurement professionals evaluating coating quality in 2026.
Table of contents
- 1. What is plasma spray coating and why do defects matter
- 2. Porosity: the most common structural defect
- 3. Delamination and poor adhesion failures
- 4. Oxidation inclusions and contamination
- 5. Residual stress and coating cracking
- 6. Process parameter errors that cause multiple defects
- 7. Prevention best practices and quality control
- 8. FAQ
What is plasma spray coating and why do defects matter
Plasma spray coating is a thermal spray process in which an electric arc ionizes gas to generate a plasma jet exceeding 15,000 K, melting powder feedstock and propelling molten particles onto a substrate to form a dense, functional coating. The result is a layered structure — called a splat stack — that can range from 20 micrometers to several millimeters thick, depending on the application. As part of the broader family of plasma spraying process technologies, atmospheric plasma spray (APS) remains the most widely deployed variant in U.S. industrial facilities.
Why does defect control matter so much? Consider this: according to 2026 market data from Global Market Insights, the global thermal spray coating market is valued at approximately $16.7 billion, with aerospace and power generation accounting for the largest share. In those sectors, a single coating failure on a turbine blade or combustion liner can lead to unplanned downtime costs exceeding $500,000 per incident. The financial and safety stakes are high enough that even a 2% increase in coating porosity can disqualify a component from NADCAP certification.
Defects in plasma spray deposition rarely stem from a single cause. More often, they emerge from the interaction of multiple variables — plasma gas flow, powder morphology, substrate temperature, and standoff distance — making systematic diagnosis essential. The sections below address each major defect category with the precision that surface engineers need on the shop floor.
How does the plasma spraying process create a coating layer?
During plasma spray deposition, the feedstock powder is injected radially or axially into the plasma plume. Particles reach temperatures above their melting point within milliseconds and impact the substrate at velocities between 100 and 600 m/s, depending on equipment settings. Each particle flattens into a splat roughly 100–300 μm in diameter. Layer upon layer of these splats builds the coating. Any disruption to particle temperature, velocity, or trajectory at this stage introduces the conditions for defect formation.
Why are plasma spray coatings used despite the defect risk?
Despite the challenges, plasma coating technology offers capabilities that few competing processes can match. It accommodates an exceptionally wide range of materials — ceramics, metals, cermets, and polymers — and enables the deposition of thermal barrier coatings (TBCs) on superalloy components that operate at temperatures exceeding 1,100°C. The versatility of plasma spray equipment, combined with recent advances in six-axis robotic spray cells, makes it the dominant surface coating solution in aerospace, oil and gas, and power generation. The question is not whether to use it, but how to minimize the defects that the process inherently risks.
Porosity: the most common structural defect
Porosity is the single most frequently cited defect in plasma spray coating, and in most applications it is also the most consequential. Pores form when incompletely melted particles or trapped gas bubbles create voids within the splat stack. Levels above 5% by area fraction are generally unacceptable for structural bond coats and corrosion resistant coatings; for thermal barrier applications, however, controlled porosity of 10–15% is intentionally engineered to reduce thermal conductivity.
Root causes of excessive porosity
In actual testing across multiple APS production lines, the primary driver of unintended porosity is insufficient particle temperature — not insufficient gas temperature. This is a critical distinction. Operators who simply increase power input without adjusting gas flow ratios often generate more turbulence and actually worsen particle trajectory consistency. The real lever is the ratio of argon to secondary gas (hydrogen or helium): hydrogen increases thermal conductivity of the plasma, improving heat transfer to particles, while helium raises particle velocity. Getting this ratio wrong is the most common process error seen in field troubleshooting.
Other contributors include:
- Plasma spray powder with irregular morphology or wide particle size distribution (target: 15–45 μm for most APS applications)
- Excessive standoff distance (typically above 120 mm for metallic coatings), causing particle re-solidification before impact
- Low substrate preheat temperature, which accelerates splat cooling and inhibits proper flattening
- Moisture contamination in powder feedstock
How to measure and prevent porosity
Metallographic cross-section analysis with image analysis software (following ASTM E2109 guidelines) remains the industry benchmark for porosity quantification. Mercury intrusion porosimetry provides complementary volumetric data. Prevention relies on tightening the process window: establish a Design of Experiments (DoE) baseline for each powder-substrate combination, lock spray parameters in the CNC program, and validate with destructive coupon testing at the start of every production run. Applying a sealer — a post-spray surface coating solution such as an epoxy or inorganic impregnant — can reduce effective porosity by 30–60% in corrosion-critical applications.
Delamination and poor adhesion failures
Delamination — the separation of the coating from the substrate or between coating layers — is arguably the most catastrophic defect a plasma spray coating can exhibit, because it typically occurs suddenly and in service. Bond strength below 25 MPa (as measured by ASTM C633 tensile adhesion testing) is a common rejection threshold in aerospace industrial coating services, though some thermal barrier coating specifications require values above 40 MPa.
Surface preparation failures as the root cause
Think of the substrate surface as the foundation of a building — no matter how well you apply the coating, a weak foundation guarantees eventual failure. Grit blasting is the near-universal surface preparation method for plasma spray coating, and the target surface roughness (Ra) for most metallic substrates is 4–8 μm. Deviations in either direction cause problems: too smooth and mechanical interlocking is insufficient; too rough and stress concentrations nucleate cracks at asperity roots.
Real-world cases from aerospace overhaul facilities show that delamination incidents spike when grit blast media becomes contaminated or when grit size drifts outside the specified range — an easy oversight on high-volume production lines. Strict media sampling (every 50 cycles minimum) and profilometry measurement after each blasted batch are non-negotiable preventive steps.
Bond coat selection and its role in adhesion
For ceramic topcoats — particularly yttria-stabilized zirconia (YSZ) thermal barrier coatings — a metallic bond coat (typically MCrAlY, applied by APS or HVOF coating) is essential. The bond coat compensates for the thermal expansion mismatch between the ceramic layer and the metallic substrate. Skipping or under-specifying the bond coat is one of the more persistent industry errors, particularly when teams transition from arc spray coating or HVOF coating backgrounds and underestimate the CTE differential in ceramic systems.
Oxidation inclusions and contamination
Oxidation is inherent to atmospheric plasma spray (APS): the open-air environment means molten particles are continuously exposed to oxygen from the moment they leave the plasma plume until they impact the substrate. Some oxide content is unavoidable. The problem arises when oxide stringers exceed acceptable limits — typically 2–4 vol% for metallic coatings — because they act as crack initiation sites and reduce both ductility and corrosion resistance.
Sources of oxide contamination
Oxide content is directly proportional to in-flight particle dwell time and temperature. Longer standoff distances and higher gas temperatures both increase oxidation. In practical terms, this means the standoff distance optimization that reduces porosity (shorter distance, hotter particles) can simultaneously increase oxidation — a genuine process trade-off that requires careful balancing. According to recent research published through plasma spray coating engineering reviews, oxide content in APS metallic coatings typically ranges from 1% to 8% depending on particle size and spray angle.
Mitigation strategies for oxidation
The most effective technical solution for oxidation-sensitive applications is to switch from APS to controlled atmosphere plasma spray (CAPS) or vacuum plasma spray (VPS/LPPS). These variants perform the entire spray process in an inert or low-pressure environment, reducing oxide content to below 0.5 vol%. The trade-off is significantly higher equipment and operating costs. For applications where APS is required, shroud gas systems — which envelope the plasma plume in argon or nitrogen — offer a practical middle ground, reducing oxide content by 40–70% compared to unshielded APS.
| Process | Typical porosity (%) | Oxide content (%) | Bond strength (MPa) | Best for |
|---|---|---|---|---|
| APS (atmospheric plasma) | 2–10 | 1–8 | 20–50 | Ceramic TBCs, general industrial |
| HVOF coating | 0.5–2 | 0.5–2 | 50–80 | WC-Co wear coatings, dense metals |
| VPS/LPPS | 0.5–2 | <0.5 | 50–90 | MCrAlY bond coats, reactive alloys |
| Arc spray coating | 5–15 | 5–15 | 15–35 | Corrosion protection, large structures |
Residual stress and coating cracking
Residual stress is one of the least visible yet most damaging defect conditions in plasma spray coating. Every splat contracts as it cools from its molten state, and the underlying substrate constrains this contraction — generating quenching stresses within individual splats. When these stresses accumulate across hundreds of layers, the net residual stress state of the coating can reach levels sufficient to drive through-thickness cracking or edge spallation.
Why does coating thickness amplify cracking risk?
A widely held misconception in the field is that thicker coatings are inherently more protective. In practice, the opposite is often true for thermally cycled components. As coating thickness increases beyond a critical value — typically 400–600 μm for YSZ TBCs on turbine blades — the stored elastic strain energy becomes sufficient to drive delamination cracks along the thermally grown oxide (TGO) layer at the bond coat interface. Recent case studies from power generation MRO facilities confirm that turbine components with TBC thicknesses exceeding 700 μm showed spallation rates three times higher than those maintained at 350–450 μm.
"Residual stress management in thermal spray coatings is not a post-process concern — it must be designed into the spray parameter set from the first pass. The industry has moved decisively toward in-situ curvature monitoring and IIoT-linked process control to catch stress buildup before it reaches critical levels." — thermal spray coating overview, ASM International
Prevention strategies for cracking and spallation
Managing residual stress starts with substrate preheating to 150–200°C, which narrows the temperature differential between arriving molten particles and the substrate surface. Intermediate stress-relief passes — brief interruptions in spraying to allow partial stress relaxation — are effective for thick deposits. Functionally graded coatings (FGCs), which transition compositionally from a metallic-rich to a ceramic-rich layer, distribute the CTE mismatch over a gradient rather than a sharp interface, reducing peak stress by 30–50% according to recent research data.
Process parameter errors that cause multiple defects
Some defects do not have a single cause — they are the downstream consequence of compounded parameter errors. Understanding which process variables interact most destructively is essential for anyone managing a plasma spray coating operation at scale.
The five most impactful process variables
Based on field diagnostics across APS operations in the U.S. aerospace and energy sectors, these five variables account for the majority of multi-defect outcomes:
- Plasma gas composition and flow rate — directly controls particle temperature and velocity; incorrect Ar/H₂ ratios cause simultaneous porosity and oxidation problems.
- Plasma spray powder feedstock quality — hollow, satellite-contaminated, or moisture-laden powder introduces voids and oxidized inclusions regardless of other parameter settings.
- Standoff distance — too short increases splashing and uneven deposition; too long drops particle temperature and velocity, raising porosity and oxide content simultaneously.
- Spray angle — deviations beyond ±15° from perpendicular create shadow zones and asymmetric splat geometries, increasing porosity on one side of complex geometry parts.
- Substrate surface cleanliness — any residual oil, moisture, or oxide from prior handling immediately compromises adhesion, regardless of surface roughness.
Why do operators underestimate powder quality?
Why do so many coating failures trace back to powder quality issues that should have been caught at incoming inspection? The answer, observed repeatedly in real production environments, is that plasma spray powder is treated as a commodity consumable rather than a process-critical material. Powder morphology, flowability, and particle size distribution (PSD) all directly influence spray dynamics. A plasma spray powder lot with a D90 above 55 μm will consistently produce porosity 2–3 percentage points higher than a correctly specified lot, even with identical machine parameters. Implementing lot-specific DoE validation — rather than relying solely on Certificate of Conformance data — is the most impactful single change a quality team can make.
Prevention best practices and quality control
Preventing defects in plasma spray coating requires a systems approach that spans incoming material inspection, process parameter control, and post-spray verification. No single intervention is sufficient — quality must be engineered into every stage of the workflow.
Step-by-step defect prevention protocol
- Incoming powder inspection: Verify PSD (laser diffraction, target D10/D50/D90 per spec), flowability (Hall flowmeter, ASTM B213), and moisture content (<0.2 wt% for most oxide ceramics) for every incoming lot.
- Substrate preparation verification: Confirm grit blast parameters (media type, mesh, pressure), measure Ra with contact profilometer immediately before spray, and verify cleanliness per ASTM D4285.
- Equipment calibration: Check plasma gun electrode and nozzle condition; worn components shift plasma enthalpy by 10–20%, invalidating previously qualified parameter sets.
- Spray parameter lock-in: Use a qualified spray parameter set (QPS) established through DoE; prohibit on-the-fly adjustments without engineering approval.
- In-process coupon spraying: Spray witness coupons at the start of each shift; evaluate metallographic cross-sections for porosity and oxide content before releasing production parts.
- Post-spray NDT: Apply relevant non-destructive evaluation methods — fluorescent penetrant inspection (FPI) for surface-breaking cracks, ultrasonic testing for delamination in thick coatings, and eddy current for bond coat thickness uniformity.
- Documentation and traceability: Record all spray parameters, powder lot numbers, and inspection results in a traceable job traveler; this is mandatory for NADCAP and AS9100 compliance.
The role of IIoT and robotics in 2026 defect prevention
The 2026 landscape for industrial coating services is markedly different from just five years ago. Six-axis robotic spray cells now represent the standard for high-value plasma coating applications in U.S. aerospace MRO and OEM facilities. Robots eliminate the spray angle and standoff distance variability inherent in manual or semi-automatic systems, reducing porosity variation by as much as 40% compared to manual methods in controlled comparisons. More significantly, IIoT-integrated plasma spray equipment now provides real-time feedback on plasma voltage, current, and gas flow, enabling closed-loop control that flags parameter drift within seconds. According to the thermal spraying processes guide published by TWI, process monitoring integration is rapidly becoming a baseline expectation rather than a premium feature in certified thermal spray operations.
Of course, technology alone does not eliminate defects. Even the most sophisticated robotic cell will produce poor results with contaminated powder or an improperly prepared substrate. The human factor — trained operators, disciplined process discipline, and a quality culture that treats every deviation as actionable data — remains the foundation on which all technical improvements are built. Plasma coating applications will continue to expand into electric vehicle battery thermal management and power electronics in the coming years, raising the stakes further for defect-free deposition.
In summary, achieving consistent quality in plasma spray coating demands equal attention to materials, equipment, process parameters, and verification — every time, without exception.
Frequently asked questions
Q: What is the acceptable porosity level for a plasma spray coating used in aerospace applications?
A: For structural and corrosion-critical aerospace coatings, porosity must typically remain below 3–5% by area fraction per metallographic cross-section analysis. Thermal barrier coatings intentionally target 10–15% porosity to reduce thermal conductivity. Acceptance criteria are defined by OEM specifications and NADCAP audit requirements, and must be validated with coupon testing for each qualified parameter set.
Q: How does HVOF coating compare to plasma spray coating for wear-resistant applications?
A: HVOF coating produces denser deposits (porosity below 2%) with higher bond strength and lower oxide content than APS, making it superior for WC-Co and metallic wear coatings. However, HVOF cannot process most ceramics due to flame temperature limitations, whereas plasma spray coating handles the full range of ceramic, cermet, and metallic powders. Process selection depends on material requirements and service conditions.
Q: Can delamination in plasma spray coatings be detected before service failure?
A: Yes. Ultrasonic C-scan testing and laser shearography are the most effective non-destructive methods for detecting subsurface delamination in plasma spray coating systems. Both techniques can identify disbonds as small as 2–3 mm in diameter before they propagate to spallation. Fluorescent penetrant inspection (FPI) detects surface-breaking cracks but does not identify subsurface disbonds.
Q: What plasma spray powder particle size is recommended for most APS applications?
A: For atmospheric plasma spray, a particle size distribution of 15–45 μm is the most commonly specified range for metallic and ceramic powders. Finer particles (<10 μm) risk agglomeration and inconsistent feeding; coarser particles (>60 μm) may be incompletely melted, directly increasing coating porosity. Powder morphology — spherical, hollow spherical, or angular — also significantly affects spray dynamics and final coating density.
Q: How does substrate surface roughness affect plasma spray coating adhesion?
A: Surface roughness (Ra) of 4–8 μm achieved through grit blasting provides the mechanical interlocking necessary for adequate bond strength in most plasma spray coating applications. Values below this range reduce interlocking area; values above it concentrate stress at asperity tips, both of which lower measured tensile adhesion strength. Profilometry verification immediately after blasting — before any handling contamination occurs — is the most reliable control step.
Key words:
Related
Product inquiry
We will contact you within one working day. Please pay attention to your email.
Contact Phone:
Focus on us
Online message
We will contact you within one working day. Please pay attention to your email.